Tattoo Waste Collection

Guide · New studios · 4 min read · Updated 17 November 2026

Setting Up Waste Collection for a New Tattoo Studio

Short answer

Before your first client, put a sharps bin at every station, a tiger bag bin for soft waste and a general bin nearby. Set up a secure store for full bins and bags, check a waste carrier on the public register, agree a collection schedule and keep the transfer notes. Have it all in place before your council registration or licensing inspection, because inspectors will ask to see it.

Setting Up Waste Collection for a New Tattoo Studio

Start before you open

Waste is easy to leave until the last minute when you are fitting out a studio, choosing stock and booking clients. But it is one of the first things an environmental health officer will look at during a registration or licensing inspection. Setting it up early means one less thing to fix after the inspection, and it lets you open with confidence.

Allow a week or two to arrange a carrier and get bins delivered. If you are moving from another studio or going self-employed after working for someone else, do not assume the old arrangement transfers with you. Each business needs its own arrangement in its own name.

  • Count your stations and plan one sharps bin each
  • Plan a tiger bag bin at each station
  • Choose a secure store for full bins and bags
  • Check carriers on the public register
  • Agree a schedule and price in writing
  • Set up a folder for transfer notes

Choosing bin sizes

Bin size depends on how busy each station will be and whether you use cartridges. A full-time cartridge artist will fill a 5–11 litre station bin in weeks, while a part-time artist or a PMU technician may take months to fill a 1–2.5 litre bin. Start with a sensible size and adjust after a couple of collections.

For soft waste, a pedal bin with a tiger bag liner at each station works well. Busy studios with several artists usually add a lockable 240 or 360 litre wheelie bin out the back to hold tied bags until collection.

Studio typeSharpsOffensive wasteTypical cost
Solo or PMU artist1–2.5 litre binA few sacks per collectionfrom £10 per bin
Two to four artists5–11 litre bin per stationSacks or small wheelie bin£25–£45 per month
Five or more artists5–11 litre bins, frequent swapsLockable wheelie binQuoted individually
Tattoo and piercing studioStation bins plus piercing room binWheelie binQuoted individually

Setting up the secure store

Full sharps bins and tied tiger bags need a secure place to wait for collection. In a small studio that might be a lockable cupboard in the back room. In a bigger studio, a locked wheelie bin in a rear yard works well. The store should be away from where clients wait, dry, protected from pests and easy for the collection operative to reach.

Do not use a shared communal bin store if other businesses or residents can open your bins. If you rent a unit above a shop, ask the landlord where waste can be stored, and get the answer in writing so there is no dispute later.

Choosing a carrier

Look for a provider that supplies the right bins and bags, collects both sharps and offensive waste on the same visit, and issues waste transfer notes. Check the registration on the public register held by the Environment Agency, Natural Resources Wales, SEPA or NIEA, and note the date you checked.

Ask about contract length and notice periods. A new studio's volumes are hard to predict, so avoid long fixed terms if you can, and ask for a schedule review after the first two or three months. Clear written prices for each bin and each visit make it easy to budget.

Training artists and apprentices

Every artist, apprentice and guest should know the system on their first day. Show them the sharps bin, the tiger bag and the general bin at their station, explain what goes where, and walk them through how to lock a full sharps bin and where to take it. Explain what to do after a needlestick injury.

Write it on one page and pin it up in the back room. Include the name of your waste provider and how to book an extra collection, so anyone can deal with a full bin if you are away.

Before the inspection

Walk through the studio the day before the inspection as if you were the inspector. Is there a labelled sharps bin at every station? Are tiger bags in use, separate from general waste? Is the store locked? Do you have your carrier contract and transfer notes, or at least the first note, ready to show?

If anything is missing, sort it before the visit. Inspectors are generally helpful with new studios, but a well-prepared waste setup makes a good first impression and keeps the rest of the inspection focused on your hygiene practice.

Your first few months

Treat the first two or three months as a trial. Note how full each sharps bin and how many tiger bags are filled before each collection, and whether anything had to wait in the store longer than you would like. That simple record is all you need to ask for a better-sized schedule.

Most new studios find their volumes rise as books fill, so expect to move to larger bins or more frequent visits within the first year. Agree with your provider at the start that you can change sizes and frequency without penalty. Keep every transfer note from day one in a single folder alongside your registration or licence, so the paperwork side of the studio is as organised as the stations.

Questions people also ask

Do I need a waste contract before I open my tattoo studio?

You should have one in place before your first client. Your council registration or licence inspection is likely to check that you have sharps bins and a registered carrier collecting your waste. Setting it up early avoids delays to opening and gives you paperwork to show the inspector.

Can I use my old studio's waste contract if I go self-employed?

No. Each business needs its own arrangement with waste transfer notes in its own name. If you rent a chair in someone else's studio, check whether their contract covers your waste. If you open your own premises, you need your own contract.

How many sharps bins does a new studio need?

One per working station is the usual starting point, plus one in any piercing room. Size depends on how busy each station will be. Most full-time stations use a 5–11 litre bin, while part-time artists and PMU technicians often use a 1–2.5 litre bin.

Written and checked by the Tattoo Waste Collection team. Read our editorial policy.

Get a free tattoo waste collection quote

Tell us what you need and we'll come back with a clear price.

Request a quote